How much water in the hull is acceptable? I had a lot of water coming into the hull about a month ago. It would fill up in a matter of a few minutes. I took it out of the water and dumped the water. I then reinstalled the plug in the rear and backed it down into the water. It filled up (well at least above the drive shaft coupling.) I took it home and tightened up all the connections in the rear. This is where I could hear the water coming in. On the siphon bilge lines I replaced the zip ties with stainless steel hose clamps. It seems that I have eliminated about 99% of the water. The bottom of the hull still gets water in it, but it never gets above or even touches the drive shaft shroud. Is this normal? I ride pretty agressively, but have never had problems like this before. It is a 95 sl750.