Announcement

Collapse
No announcement yet.

Sl 650 driveshaft

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sl 650 driveshaft

    I was lubing the driveshaft and bearing today and when i pumped grease into the coupler the driveshaft moved outward in the direction of the impeller, is this normal? I put a couple of pumps in both, is that ok? I bought it used and dont know if they had this done or not. Thanks

  • #2
    My 95 SLX does the same thing.I call it normal.Probably also indicates the alignment between the engine and impeller is good because there is no binding and the shaft moves freely.I have a new driveshaft and support bearing in mine.I pump mine until i see a little grease ooze out.

    Comment

    Working...
    X