jetting for mikuni 38mm super bn carb

[dark]

I have two wetjets with a brut 432cc engine with an old bn round body mikuni carb. I bought a pair of 38mm super bn carbs off a wave raider with a 701 to replace each. I need help with the specs (jet size, etc) I should start with or need for the new mikuni's to work on the brut. Thanks for your help.

Also are these skis close to the kawasaki 440 in settings and parts (starter, etc)?

[davidlem]

Re: jetting for mikuni 38mm super bn carb

Well here are the factory specs on the RA701 SBNs from Clymer manual

Idle 1250rpm, low screw 5/8 +-1/4, high screw Front 5/8 +-1/4 Rear 1-1/8 +-1/4.

Dont know how that'll run on the WetJets.