Announcement

Collapse
No announcement yet.

550 no spark

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 550 no spark

    I have been riding a Kawi 550 and I was out in rough water on day and it just died. I cheked area for water, carb, pistons no sign of water- I then checked to see if i was getting a spark and i was not. I do not no where to go from hear can any one help me out.
    I also wanted to know how the best way to take apart the electrical box is ?
    I am dying to ride again
    Thank You

  • #2
    Re: 550 no spark

    I'll put my money on the stator being bad. Do you own a multi meter? If you do I can give you specs. The good news is if it is the stator, a company called WSM sells aftermarket coils for that ski and they are pretty inexpensive. You can also find tons of parts on ebay.

    Comment


    • #3
      Re: 550 no spark

      Originally posted by Antwon
      I'll put my money on the stator being bad. Do you own a multi meter? If you do I can give you specs. The good news is if it is the stator, a company called WSM sells aftermarket coils for that ski and they are pretty inexpensive. You can also find tons of parts on ebay.
      Hey thanks I have a meter can you give me the specs Thanks I am waiting on the repair manual

      Comment


      • #4
        Re: 550 no spark

        Yeah, the new stator is $400 from Kaw, but the aftermarket coils are like $35 each. This will fix you right up.

        Comment


        • #5
          Re: 550 no spark

          charging coil
          green to black 1.2-1.8 ohms
          green to green 2.4-3.6 ohms

          exciter coil
          red to black 112-168 ohms

          pulser
          red to gray 14.4-21.6 ohms
          Dan Solie -
          04 RXP (the "Instigator")
          94 xp (freestyle mods)
          95 xp (faster than the 94)
          JS550 (the toothpick & the loaner)

          For FREE Seadoo Manuals - Click HERE!!!!

          http://www.tripleateam.com/water/v/U...ery/Dan-Solie/

          **** Please do not PM me. I don't do PM's.... Please post your question on the correct forum so that all can see and learn. Thanks! ****

          Comment

          Working...
          X