Announcement

Collapse
No announcement yet.

Changing all bearings and seals in the zxi 900

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Changing all bearings and seals in the zxi 900

    I just bought a 900 motor from you at SBT and decided to change all seals and bearings from the impeller back and from the impeller forward. Just ordered them all from you at SBT. Should be here around Thursday. What is the best way to remove the seals and bearings in the jet pump and the bearing housing. The bearing housing looks to be a tough job.:emoticonc
    Thanks
    If first you don't succeed, suck suck till you do suckseed

    98 kaw 750 XI Sport
    2 - 95 Kaw 900ZXI
    Tags: None
  • #2
    Re: Changing all bearings and seals in the zxi 900

    It's just bolts and silicone - clean everything well before you reassemble.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment

    • #3
      Re: Changing all bearings and seals in the zxi 900

      Are the bearings pressed in?
      If first you don't succeed, suck suck till you do suckseed

      98 kaw 750 XI Sport
      2 - 95 Kaw 900ZXI

      Comment

      • #4
        Re: Changing all bearings and seals in the zxi 900

        Yes but they just tap out.
        SBT Tech Support is here to help with your problems.
        We try to answer each question quickly and accurately.
        Please do not use Private Messaging for Tech Support, use the forums.

        Comment

        Previous template Next
        Working...
        X