Tweet
Ok, ran the ski for a while and it ran fine. At idle speed it seemed to grind to halt. Kept making a grinding noise before it would stall. Then some starts were very hard, like it was seized or something. Checked intakes, checked oil, everythign was fine. Started going again and it wouldn't go fast, just kept grinding. Finally something snapped and it didn't grind, but it didn't move forward. No jet action at all. Engien runs fine, no isues, starts fine now, runs fine, got water out of bypass, but it won't move forward. Is this a dirve shaft? I cna reach my hand in the jet nozzle and move this metal shaft with my hand, seems to be very loose like its not connected to anything. Any help is greatly appreciated!!!
-
-
Re: 1997 900STX - No Propulsion
The SBT Forums are for SBT Product Support ONLY. For all general PWC support/discussion, please post on www.pwctoday.com.
Thank you - SBT Mgt.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.
Comment