X2 carb adjustment

[Dutchy]

Hello,

I was running my X2 jesterday. The engine runs smooth only the carb settings are bad ( thats what i think ).

The engine stalled when i wanted to drive away. When i put it on the shoke gave some gas then off the shoke than the engine dit it ( playing
with the shoke ) So the engine must nog get enought mixture.

The High speed nedle was 1.5 strokes out
The LS was fully in ( thats not good )

LS fuel adjusters is size 52
HS i thing 127 ore someting

I took the inlet apart.
Cleand it all
Membranes are good
No broken gaskeds

The engine ran good while leaving it someware on the choke. So it must be a feul problem.

How should i adjust my carb in the origional steeings?

Thank you,

[Technical Support]

Re: X2 carb adjustment

Try opening the high speed screws another 1/8 turn and see if it gets better. also the low speeds may need to be opened up more.

[Dutchy]

Re: X2 carb adjustment

Oke i will try that!

But What are the origional settings for sutch a carb?

The low speed was fully in so that needs real adjusting :)

I love SBT btw! youre video's are super cool! Im a fan! ( im from holland )

Thank you,

[Dutchy]

Re: X2 carb adjustment

Hello ,

Sorry for my late post.

I found out that the problem was due to an old pump membrane in the carb. I cleand everything. Put an new membrane in there and adjusted the LS en HS. My sky now runs smooth.

Thanks,