Tweet
Is there any way to see if my oill inject is working? i have a piston i have to replace and i am wondering why it cracked on me. Want to make sure it is getting oill. Anybody know of any quick ways on doing this? Run it for a bit and pull the plug and see if it had oil on it or what? any help would help. thanks!
-
-
Re: Checking oil inject?
Pre mix your fuel in the tank to 40:1 then cap off the nipples on the carbs that the oil lines are connected to and lay the oil lines on paper towels in the ski, start the ski and check for flow at 1000 rpm.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.
Comment