Announcement

Collapse
No announcement yet.

CDK2 Carb Kit Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CDK2 Carb Kit Question

    Tried the search feature, could not find a referenced CDK2 Rebuild Guide. Link to that would be appreciated. Question is: 92 CDK2 on a Kawi 750 standup. I bought the kit, but did not pay attention to which side the clear diaphrams go on in the fuel pump. There is a rubber gasket, and a clear diaphram X 2. Need to know where the diaphram goes, inside so the center part is sandwiched? Looked at the old parts, but they all have indentations and can't tell.
    Thx in advance.

  • #2
    Re: CDK2 Carb Kit Question

    You will only use 1 of the clear plastic pieces on each side of the fuel pump body. It goes like this, pulse nipple block gets gasket with large hole, then clear plastic then o-ring. That completes outside of fuel pump. Other side (goes to the carb body) o-ring to center section of fuel pump, then clear plastic then gasket to carb body.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment

    Working...
    X