It will start and idle just fine but as soon as I hit the throttle it bogs down and will not accelerate (neither in the water nor on the hose)
It ran fine a week prior to developing this problem.
Carbs are in good shape and I actually swapped them out with the carbs from another STX 900 that is running correctly and the problem persisted.
Did a compression test and each cylinder is right at 100psi.
I opened the e-box and there are no signs of corrosion or lose wires.
I replaced the plugs and removed the plug wire ends and cut the wires back about 1/4in, cleaned them and reinstalled.
The digital multifunction meter doesn’t work, but it hasn’t worked for a while now so I doubt it has anything to do with this problem.
Where do I go from here?
It ran fine a week prior to developing this problem.
Carbs are in good shape and I actually swapped them out with the carbs from another STX 900 that is running correctly and the problem persisted.
Did a compression test and each cylinder is right at 100psi.
I opened the e-box and there are no signs of corrosion or lose wires.
I replaced the plugs and removed the plug wire ends and cut the wires back about 1/4in, cleaned them and reinstalled.
The digital multifunction meter doesn’t work, but it hasn’t worked for a while now so I doubt it has anything to do with this problem.
Where do I go from here?
Comment