Announcement

Collapse
No announcement yet.

94 750 idle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 94 750 idle

    Well, after working on my carbs, my low speed is rough. All plugs after a high-speed wash is great, but after low speed running (1400-2400 rpm) for a minute, the middle plug is black. I sure thought i opened the idle screw 1/2 but those springs are really strong. I'll check again tonight after removing the spark arrestor, but I'm afraid of mashing it down too tight.

    Any other ideas?

  • #2
    Re: 94 750 idle

    You will just have to get out and keep fine tuning it. If you get a bog and see a rich looking plug, start turning the low(s) in 1/8th at a time. Ride around for 30 seconds and do some runs from idle to test again. Rinse and Repeat as needed :)
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: 94 750 idle

      thanks :)

      Comment

      Working...
      X