Tweet
i have a 1200di that was sunk over the weekend. i am trying to get it started but having no luck. if i pour gas down the throttle body, it will run for a few seconds, but its not getting fuel on its own. what is the valve stem fitting for in the fuel line?
-
-
Re: polaris 1200 di wont start
To measure fuel pressure.
You might as well stop now and pull the engine - if it's been sitting now for 3+ days, the engine is toast. If you get it fired now, you are most likely just gong to crack a hole inthe cases when it lets go.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums. -
Re: polaris 1200 di wont start
actually, when i took the plugs out and turned the ski over, there wasnt any water in the engine. the ski will run if i manually give it fuel. i am assuming there is an electrical fuel pump on these. and maybe when the water filled the engine compartment, it blew a fuse. any help would be appreciated.Comment
-
Re: polaris 1200 di wont start
OK then it didn't 'sink', you simply got some water in the hull - big difference.
Check all the fuses and boxes for traces of water - the fuel pump is in the fuel tank.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
Comment