Tweet
Hello, since I have went to mixing my gas and oil, I can't get high speed jet to work properly on my readings. I have a 95 750 slt with ocean pro vortex flame arrestors. When I check the plugs at high speed they are dry on the rims. The thread has a good oil on it, and I was wondering if the rims needed to show some oil gas mixture on them. I have the high speed turned out almost all the way and there is still no change. The low speed is out about 1 turn, and they are fine. Do I need to go to a 30:1 mixture instead of 40:1. The waverunner runs great, but I don't want to burn a hole in the piston, so I'm wondering if the administration or someone else can help me out. If I do need to go up jet sizes, what do I go to. I'm not even sure what is on there now. Thank you in advance.
-
-
Re: Dry spark plug
http://www.sbtontheweb.com/forum/showthread.php?t=24764
forget the fuel pump stuff in this link. Just read about the jetting. That's what worked for me. I had the same problem.
Comment