to make it easier on me and everyone else, can anybody put a picture on here of how their hoses for the fuel is all hooked up. the link for the diagram was good but confusing. if anybody can it would be really appreciated. i dont know what hoses are teed up with what other hoses.
Announcement
Collapse
No announcement yet.
fuel problem
Collapse
X
-
Re: fuel problem
It's pretty simple, but unfortunately i doint have a pic.
All the fuel comes in from the pump on the bottom. I assume you have upgraded the pump? If so, if it has 2 outputs all you need is 2 tees. one between carb 1&2, and another between 2&3.If you have a pump with 1 outpus, and it is hi volume, just plumb them all inline and have the pump output go to the nipple on the carb inlet on #3. All of the returns, in either case, get plumbed in line, coming out the rear. Make sure there is a restrictor in the return line that goes to the tank.
Comment