help with double feed fuel pump/hard start

[94polaris]

I have a 94 polaris slt that I have ordered a new Mikuni Fuel Pump 5 Sided Dual High VolumePart#: 14-2230. What is the best/easiest way to hook up the fuel lines?

I have seen where people put t's between 1&2, 2&3 carbs and then cap the original input line. Or could I use the original fuel rail system and run the two fuel pump outlets to a T and then run this to the original input fuel line going to the rails?

also this Ski is hard starting when cold. If I shoot gas into the intake the ski fires right up. Could I put a primer bulb in the fuel line somewhere, would it put a little fuel into the carbs. so that I would not have to take the air cleaner off every time I start it for the day? Or maybe I need to take the carbs off and test the pop off?

I would really appreciate any help on these matters. thanks

[la90043]

Re: help with double feed fuel pump/hard start

[IMG]file:///C:/DOCUME~1/Robert/LOCALS~1/Temp/msoclip1/01/clip_image001.jpg[/IMG]

[la90043]

Re: help with double feed fuel pump/hard start

lets see if it came through

[la90043]

Re: help with double feed fuel pump/hard start

[IMG]file:///C:/DOCUME~1/Robert/LOCALS~1/Temp/msoclip1/01/clip_image002.jpg[/IMG]

[la90043]

Re: help with double feed fuel pump/hard start

lets see now.

[la90043]

Re: help with double feed fuel pump/hard start

lets see now.

cool.......click on the image..................

[94polaris]

Re: help with double feed fuel pump/hard start

thanks but the pump I ordered only has two outlets, pulse line and main feed anything for the two outlet pump?

[la90043]

Re: help with double feed fuel pump/hard start

plug one outlet up at the pump. and install the same way as stock.

[la90043]

Re: help with double feed fuel pump/hard start

or you can connect one line as in its stock location and the other line to the mag/front carburetor.

[94polaris]

Re: help with double feed fuel pump/hard start

thanks for your help!