Tweet
Went riding today on my 97 slt780 and it ran fine. After an hour the speedometer function on my mfd just read 00.0 continualy. all other functions working fine. Is a piece of debris plugging up or covering a tube or hole somewhere? Any insight would be appreciated. Thank You
-
Mike -
It certainly could be - you will need to take the tube out and check it.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums. -
Don't go at the tube just yet - take a look underneath the boat at the little fin thats just as the water goes through the intake grate. I had problems (my SLT 750) and found that I had hit a stick or log just right and stuffed the little 1/8" hole on the fin with wood debris. Clear that hole out with a needle or something similar (w/o pushing the debris further in) and you may fix it that way.
If you find no debris at that point of entry - then yes, you gotta go in and clear the tube most likely.
[ July 30, 2003, 01:23 PM: Message edited by: ShowMePro1200 ]Comment
Comment