Tweet
Is there a way to test the Oil Injection system on a 95 Sl 650? I burnt a cyl. due to no oil on the center cyl. I would not like to burn it again. I am currently running premix. 40-1. Any help is greatly appreciated.
-
-
No, you cannot fully test at home.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums. -
Thank You, But can you tell me basically what does it involve. I think I should be able to T into the lines going to the Injection Nozzles and see if there is any Pressure when the engine is running. If this is not doable what can I expect to pay as a reasonable price or how long should it take a competent shop. Thanks for any help.Comment
-
Most shops can't do it either - you need to spin the pump counter clockwise at 7000 RPM and measure the exact output of each injection line.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
Comment