It's a 96 XP 800 Limited boat. When I put the key on I get the two beeps. And then I get spark. Good strong spark. Then I put the plugs back in the cyl s and no spark. I pull the plugs out...no spark.. I wait.. No spark.. I pull the key and then pop it back on 2 beeps and then I get SPARK again. But when I put them in they stop sparking...
So far I have:
Cleaned/sanded all ground connections. The last thing I did before this problem was to change starters if that means anything..
Checked resistance on the key thing and it was fine. I checked resistance on the start / stop button and when I hit the button it showed about 6-9 ohms... Is this too high? Could this be start stop switch related?
Im going to go and totally replace the rear ground wire and see if that helps.
What else can I do?
So far I have:
Cleaned/sanded all ground connections. The last thing I did before this problem was to change starters if that means anything..
Checked resistance on the key thing and it was fine. I checked resistance on the start / stop button and when I hit the button it showed about 6-9 ohms... Is this too high? Could this be start stop switch related?
Im going to go and totally replace the rear ground wire and see if that helps.
What else can I do?
Comment