Announcement

Collapse
No announcement yet.

Gti codes

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Gti codes

    Hi
    I have a 2004 GTI-RFI that after stopping and reconnecting the lanyard I recieved the normal 2 beeps but quickly followed by 4 beeps and wwould not start. This hapened 3 times then everything was fine. Does anyone have a chart on what the different combination of beeps means?
    Thanks
    J casey
    Tags: None
  • #2
    Re: Gti codes

    Low or bad battery, and/or bad connections in your electrical box.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment

    • #3
      Re: Gti codes

      Thanks for that quick response. Any idea why it only did it those couple times all at once antd then was fine after that.
      J casey

      Comment

      • #4
        Re: Gti codes

        OOps - wrong thread.
        Last edited by Technical Support; 06-07-2005, 01:44 PM.
        SBT Tech Support is here to help with your problems.
        We try to answer each question quickly and accurately.
        Please do not use Private Messaging for Tech Support, use the forums.

        Comment

        • #5
          Re: Gti codes

          it didn't seize. I shut it off to talk to someone and when plugging the lanyard on i got those beeps then unplugged it tried it again same thing tried it again and all was well all within a 30 second timeframe
          J casey

          Comment

          • #6
            Re: Gti codes

            I'm sorry - ignore that post, it was on the wrong thread! LOL


            I would imagine you have a bad connection in your box giving you an intermittant connection, and thus the codes.
            SBT Tech Support is here to help with your problems.
            We try to answer each question quickly and accurately.
            Please do not use Private Messaging for Tech Support, use the forums.

            Comment

            • #7
              Re: Gti codes

              thanks i'll check that out
              J casey

              Comment

              • #8
                Re: Gti codes

                Each time you plug a Sea Doo DESS lanyard in. you need a minimum of 8 seconds between plug-ins for the computer to reset itself. I usually wait 15 seconds.
                Bill O'Neal <br>
                WCM
                <a href="http://www.watercraftmagic.com"

                Comment

                • #9
                  Re: Gti codes

                  Thanks Bill
                  I haven't had it happen since
                  J casey

                  Comment

                  Previous template Next
                  Working...
                  X