If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
msd inject water with PSI pipe xp 96??(it's possible)
Re: msd inject water with PSI pipe xp 96??(it's possible)
That would be a bad Idea. The water flow needs to be down stream of the exhaust flow from the manifold. You do not want water coming from the back pressure on the down stroke.
Re: msd inject water with PSI pipe xp 96??(it's possible)
Well I would try to go about a min of 6 inches from the exhaust ports. Keep in mind some Dry pipes do not benefit form ECWI system.
Also have you tried to contact PSI on adding this too?
Please don’t take this the wrong way, but why are you running this pipe? All my expert and pro buddies run Factory Pipe. There are just many more people out there with knowledge of these pipes.
Never the less good luck with you venture.
Also I have Spec II I am looking to sell. $300.00 + 27 to ship USPS
Comment