Announcement

Collapse
No announcement yet.

One for the Pro's

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • One for the Pro's

    1996 Seadoo GTX! Here's the deal replace plugs engine starts runs for a couple of mins sut down motor. try to restart there is no fire! I have a spark plug tester before the plug no fire! Take one plug out does not matter which one lay on side of engine block and engine will run one one cyclinder and fire the plug that is out. Put the plug back into the cyclinder no fire!
    Things that i have done! Replace spark plug caps and cliped the wire ends!
    "CLUELESS" :emoticonr

    Yes new battery!

  • #2
    Re: One for the Pro's

    Have you tried a new battery?
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: One for the Pro's

      if it sparks with the plugs out but not with the plugs in , it could be a bad starter or battery cable , if the starter draws to much when cranking you will loose spark .
      PRIDE IN SERVICE<br /> <img src="http://www.sbtontheweb.com/images/forposts/4609/1.jpg" alt=" - " />

      Comment


      • #4
        Re: One for the Pro's

        Runs fine with one plug out or put a new set in and it will start up and run then turn motor off and try again no fire!

        Comment

        Working...
        X