???Pop Off Pressure for 95 GTX w/ 657X???

[BradMB2004]

What is the pop off pressure for 95 GTX w/ 657X???

[postal]

Re: ???Pop Off Pressure for 95 GTX w/ 657X???

19-35 psi

[BradMB2004]

Re: ???Pop Off Pressure for 95 GTX w/ 657X???

where in that range should i shoot for?

[John Kubiak]

Re: ???Pop Off Pressure for 95 GTX w/ 657X???

Between 19 and 35 psi

[BradMB2004]

Re: ???Pop Off Pressure for 95 GTX w/ 657X???

thanks guys

i'm at 18 now. I'll put in my 115 spring and start cutting...

[BradMB2004]

Re: ???Pop Off Pressure for 95 GTX w/ 657X???

the best i can get out of my other set of springs in 20psi. Can i buy springs individually or do i have to buy the whole kits??

[John Kubiak]

Re: ???Pop Off Pressure for 95 GTX w/ 657X???

20 psi is fine

[BradMB2004]

Re: ???Pop Off Pressure for 95 GTX w/ 657X???

the needles were not holding pressure unless they were totally wet. They would "pop" one time and then they would leak if i kept pumping to check again(gradually build up pressure while leaking down). These are the original N&S... New N&S or is it supposed to leak down that way?

[Bill O'Neal2]

Re: ???Pop Off Pressure for 95 GTX w/ 657X???

That was confusing. Are they the orginal N&S's or are they New Original equiptment Mikuni N&S's ?

NEVER CUT SPRINGS !! There is not one good reason I can think of to EVER cut a spring. Mikuni offers plenty of different springs and plenty of different N&S sizes. By matching the different springs with the needle and seat sizes, you can get any PO pressure that you want. There is a chart on their website telling you the PO pressure of the different combinations of springs and needle sizes. Use it. Then order the correct parts.