I am having a problem with mt 1999 GTI 3 seater. I put a new sbt motor in the boat about 5 hours ago. It runs fine until you shut it off and let it sit for about 20 minutes then it gets water in the cylender and nocks the spark out in that cylender and shuts the motor off (not locking up) but stalls. If I remove the spark plugs get the water out then put the plugs back in, it will run again and run fine until you shut it off again. Has onyone had this issue before any thoughts where to start to find the water? The motor is under warrenty but I want to make sure its not something other than the motor before I call SBT for a warrenty motor.
Announcement
Collapse
No announcement yet.
Water in cylender on a new SBT motor for a 1999 3 seater GTI
Collapse
X
-
Re: Water in cylender on a new SBT motor for a 1999 3 seater GTI
Installing an SBT motor means that the customer has to install the exhaust manifold and exhaust pipe. In doing so, if you messed up a gasket, it could leak water back into the engine. Other than that, I cannot think of anything you can do without voiding the warrantyBill O'Neal <br>
WCM
<a href="http://www.watercraftmagic.com"
Comment