Tweet
i took apart my carb sbn38 to see how it looks. the spring had some corrision and a couple of the screws were too. this tells me that a rebuild is in need. i looked at the adjuster screws and the tips were not pointed they were more flat. i am thinking this maybe the reason why i had problems with hard start and keeping an idle. where is a good place to order the screws i am going to get a rebuild from sbt or bill. is there a website i can go to that has a good break down of the carb so that i can order the little screws the had corrison on them
-
-
Re: carb rebuild
I have everything you need right here.
626 914 9509 M-F days.Bill O'Neal <br>
WCM
<a href="http://www.watercraftmagic.com" -
Re: carb rebuild
cool should i replace everything that had crossion on it? i know the kit has a new spring. what about the adjuster screws if they are more flat than pointed should i replace them?Comment
-
Re: carb rebuild
Yes, a needle valve must be perfect to work correctly.Bill O'Neal <br>
WCM
<a href="http://www.watercraftmagic.com"Comment
-
Re: carb rebuild
You can also get yourself the Mikuni manual for your carbs....it will help you out i'm sure. Do a search for it on Google and if you cannot find it then let me know and i'll have a look for youComment
Comment