Tweet
if I purchase 951 short block, what else do I need for swap?
-
-
Re: 951 Engine Swap
At the very least, the Installation Gasket Kit.
What else depends on the tools you already have. The Install Guide shows you all the tools and sealants you'll need. For the engine alignment you can do it yourself (if you need that tool we rent and sell it) or have a local shop do it for you.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums. -
Re: 951 Engine Swap
I did not see anything in the installation guide about engine alignment. Do you have a link to that?Comment
-
SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
-
Re: 951 Engine Swap
What is the exhaust boot kit?Comment
-
Re: 951 Engine Swap
It is a rubber piece that wraps around the exhaust at the pipe to manifold joint. It's needed on older 951 skis that have not yet had it installed - most were updated years ago by dealers.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
-
Re: 951 Engine Swap
mine is a 98. Not sure if it's on there. Would it be obvious?Comment
-
SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
Comment