Tweet
Re: electrode now touching tip!
Check the rod too, you may be in the midst of a bearing failure!
Check the rod too, you may be in the midst of a bearing failure!
-
John Kubiak
Powersports Technical Training Professional
Las Vegas, Nevada
Sea-Doo Tech 13736
PWC Tech since 1988 (22 years)
PowerSports since 1976 (34 years)
NEVER BUY TIRES AT A "BLOW-OUT" SALE
Please do not use Private Messaging, use the forums. -
Re: electrode now touching tip!
The day that this happen, what was the weather like? Tom SBT tech.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
-
Re: electrode now touching tip!
It was a dry day about 70 degrees and the water temp was about 52.Comment
-
Re: electrode now touching tip!
Check your RV cover for a hairline crack on the PTO side.. If you installed Bill's F/A kit, then you removed the stock airbox, that mounts to the head cover as well. Once you install F/A's without a brace (most people don't), then the carbs act as a heavy leverage point against the RV cover.
Sometimes they crack.Dan Solie -
04 RXP (the "Instigator")
94 xp (freestyle mods)
95 xp (faster than the 94)
JS550 (the toothpick & the loaner)
For FREE Seadoo Manuals - Click HERE!!!!
http://www.tripleateam.com/water/v/U...ery/Dan-Solie/
**** Please do not PM me. I don't do PM's.... Please post your question on the correct forum so that all can see and learn. Thanks! ****
Comment
-
Re: electrode now touching tip!
I left the brace on. But will look tonight anyway.Last edited by gsxr800; 06-02-2008, 12:43 PM.Comment
Comment