Can I update an aluminum pump with plastic

[superjet222]

Does any one know if an aluminum pump body can be updated to a plastic body. I have an older pump that has a few good size nicks in the stator veins. I have a plastic pump with bronze stator in super condition.
Every thing looks ok except the nozzle. The older alumni nozzle ears have a .020 gap mounting to the plastic body. I only have the plastic stator so I will have to swap every thing else.
Any help is appreciated
Thanks

[dsolie]

Re: Can I update an aluminum pump with plastic

What type of ski?

[John Kubiak]

Re: Can I update an aluminum pump with plastic

The pump housing will work.

In addition to the pump housing you will need the following parts to complete the pump assembly <unless you already have them>. (quantities required)
FITTING-PUMP 293700019 (1)
FITTING-BAILER 293700017 (2)
OUTLET-WATER 271000972 (1)

Depending on your hull, you may need to replace the mounting studs with longer ones.
STUD-M10 211300015 (4)

And you will need to use oversize flat washers on the plastic tabs of the pump mountings.
WASHER-FLAT 234001600 (4)

Additionally you may want to add these parts to complete the upgrade.
impeller cover 271000895 (1)
spring, anti-rattle 271000973 (1)
pusher, anti-rattle 271000978 (1)

[superjet222]

Re: Can I update an aluminum pump with plastic

It all worked great.
Thanks