Announcement

Collapse
No announcement yet.

2nd engine not running right

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2nd engine not running right

    Need help!!!!! This is my second SBT engine that I have installed. I was on my 2nd tank of gas breaking it in when the motor just stopped. I cranked it back up and it started took it back up to 80% and it continously stopped until getting back to the dock. On the way the motor progressivly got worse.

    I brought it back home and decided to check cylinder pressue. Front cylinder 140+ psi, Rear cylinder 90 psi. What gives???? This is the third motor the rear cylinder has given out. Could this be a carb problem???

    Please any help would be greatly appreciated!!! I still have the warranty for a couple of more weeks...

  • #2
    Re: 2nd engine not running right

    Yes it is more than likely your carbs, did you rebuild them? You’re running the rear cylinder lean and seizing the piston.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: 2nd engine not running right

      I personally didn't rebuild them but a marine mechanic was supposed to. The reason I say that is because I paid him 200.00 to rebuild them in the off season and then the boat dealer fired him a month later.

      Comment


      • #4
        Re: 2nd engine not running right

        I forgot to thank you for the reply. Also, what do I need to do to make sure this does not happen again?

        Comment


        • #5
          Re: 2nd engine not running right

          If the carbs are rebuilt properly it should not happen again.
          SBT Tech Support is here to help with your problems.
          We try to answer each question quickly and accurately.
          Please do not use Private Messaging for Tech Support, use the forums.

          Comment


          • #6
            Re: 2nd engine not running right

            Thanks, i will make sure of that!

            Comment

            Working...
            X