Tweet
Hello all. I have a 97 xp that i've been working on for some time now. Latest trick is it ran fine one day, not on the second day it suddenly bogged down and upon return to the beach I notices the oil supply line to the crank housing was milky... It also stuck the aft rave valve. I removed the raves, carefully cleaned them (carbon build up) and reinstalled. Also went thru the tuned pipe and elbow, welded an exterior leak but found no interior leaks. Next I pumped out any contaminated oil and cleaned all the lines, tank and replaced the inline oil filter. After a successful restart on the hose I still find a small amount of water coming from the crankcase oil supply hose. Do I wave a bad crank seal or a wasted block? Any help would be much appreciated!
-
-
Re: 97 xp water in oil.
A center crank seal will not have water near it, if you see water in the lines to or from the rotary oil compartment then the case is most likely damaged.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.
Comment