Tweet
does anyone know the hi and low speed adjustment spec for a 1995 spi single carb? It has a slight bog from start. thanx
-
-
Re: adjust please
Low speed 1 1/4 + or - 1/4
High speed 0
Idle speed out of water 2500 RPM -
Re: adjust please
Thanx, tried that but didnt fix problem. Just being curious but why zero on high speed? wont this make it run lean?Comment
-
Re: adjust please
That's the setting that seadoo recommends. There is usually a black cap on the high speed screw that will only allow you to open it up 1/4 turn. If you are getting the bog from idle to hammering the throttle wide open you might try opening the high speed setting to 1/4 open. If that doesn't help try the low speed setting 1/4 in or out. Don't go in on the low speed any more then 1/4. That would make it run lean. Sounds like you are almost there if it is a carb problem. Just needs a little more tweaking on the adjustment.Comment
-
Re: adjust please
ok thank you. Ill try and let you know.Comment
Comment