2000 RX carb and exhaust removal..HOW???

[chrisgo]

Does anyone have any tricks to getting these things off. I cant seem to reach the nut on the exhaust flange with anything. If you have to remove the carbs first what is the best tools to use. I have the flame arrestor off already, but I need to replace the fuel lines as they are the Tempo brand and I need to change the filters in the carbs. I also have to replace the hose coupling on the exhaust. Any help would be appreciated.
C.G.

[Technical Support]

You need a special wrench to get the nut and pipe off first. Use a allen socket to get the carbs off first. Everythign is detailed in our Install Guide, in the Tech Section.

[Bill O'Neal]

The carbs are held onto the manifold with 6mm allen head bolts. They are not difficult to remove. Once the carbs are off, getting to that nut is a piece of cake.