Today the warning buzzer started sonding formthe first time i started the ski. Constant steady buzz. I felt the cylinder head with my fingers and it was very cool. I disconnected the wire to the head sensor and the noise stopped. I ran the ski checking it for temp and all day it stayed extremely cool to the touch. I left the wire disconnected.
The Ibuzzed out the sensor to ground and it is not a dead short. Is there a resistance reading for this sensor??
the factory manual lists NOTHING about it other than to replace it.
Thanks in Advance
PS. Is there a stronger motor mount to buy d\for this ski?? this things go thru mounts every couple of years. It doesnt get abused bad, averaging only 30 hours a year.
Smitty
[img]graemlins/cwm3.gif[/img]
The Ibuzzed out the sensor to ground and it is not a dead short. Is there a resistance reading for this sensor??
the factory manual lists NOTHING about it other than to replace it.
Thanks in Advance
PS. Is there a stronger motor mount to buy d\for this ski?? this things go thru mounts every couple of years. It doesnt get abused bad, averaging only 30 hours a year.
Smitty
[img]graemlins/cwm3.gif[/img]
Comment