Announcement

Collapse
No announcement yet.

Circlip position in piston????

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Circlip position in piston????

    I installed my new OEM pistons and circlips the other day. I positioned the circlip so that the opening is facing the bottom (6 o'clock). My Question is that on one of the circlips the corner of the circlip is close to the notch in the piston, will I run into any problem with it popping out?? I don't think I will they are in there good with no movement as welas everything being new. Any oppinions would be great
    Thanks Chris
    Factory Pipe Spec 2 <br />愛&D Rec Head<br />意ovi 44XR Carburetors<br />FLY Flame Arrestors<br />感rimer Kit/Premix (40/1)<br />愛+D Aquavein Intake <br />Galindo Grips<br />愛+D 85/88 mm Hydro-force Nozzle<br />惹olas XO (16.5/24) Impeller<br />媲each House Sponsons<br />廈ydro-Turf Mats<br />嫂WD Bow Spray Deflector<br />廉armin Etrex GPS (61.5 MPH)
    Tags: None
  • #2
    6 or 12 is perfect - they won't move.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment

    Previous template Next
    Working...
    X