I need to know what the max rpm is and the top speed stock is what the revlimiter is set at and after 3/4 trottle theres no more power is it because the prop is'nt got enough pitch on the trailing edge to push more water thru and all ready running on the revlimiter. i adjusted the carb jetting for low,mid, and high speed and jetting is real good for plug color at all speeds any ideas maybe a different multy pitch prop and what angles it come stock with a stainless 12/23 pitchand what top end speed would i expect it doesnt have a tach on it either so not sure what its running at thanks.
Announcement
Collapse
No announcement yet.
ts 900 l need help
Collapse
X
-
the carbs are all in sync i used a 3 carb mercury vacumm adjuster to set the carbs first before i adjusted the carbs and the chokes are all working fine and all the way open any other ideas.Thanks got to go to work now but will check here tomorro [img]graemlins/crying.gif[/img]
Comment
-
Take a half hour to pull head and look at piston tops. The sharks will run and run with fried pistons but a loss or thrust and top end will be there. Did you put the gaskets on under the flame arrestor plate after scoping carb. Did you use new ones. I think I paid 35 cents apiece from Arctic Cat for mine, so it is not worth being tight about.
Comment
-
Hi the compressions fine and i put all new gaskets on when i went thru the carbs.It tops out at 53 miles an hour but theres just nothing after 3/4 trottle i do need a tach i thought there should be more pull after 3/4 thrttle thats why i was wondering if changing props with different pitch would give added throttle and top end speed and witch prop would you suggest and leading and trailing angles thanks
Comment
Comment