Shark 1000 jetting

[EricH]

Hi all,

I'm wondering if anyone has the stock jetting settings as listed in the service manual.

I'm interested in the pilot and main sizes as well as the low speeds setting and high speed 'jet'(???, I'm used to seeing a screw) size. I'm asking simply because I'm curious. I've cleaned the carbs on a friends ski and was surprised to find 3 different main jet sizes and 2 different HS sizes. I don't remember the exact numbers but I think the mains ran something like 100, 135, 120 with the HS jets being 100, 95, and 95. I assume this is correct and kept everything the same. I just want to verify the numbers, as they seem a tad strange.

Anyone got a manual for sale???

Thanks,

Eric

[Bryan Glynn]

I can get you the specs mOnday morning if no one lese does by then.

Try these guys for a manual.

[EricH]

Bryan,

Big jet in the middle??? :D

I know your busy..

Thanks

Eric

[Bryan Glynn]

Lows:
All: 72.5

Highs:
#1: 105 #2: 130 #3: 125

Mains:
#1: 90 #2: 95 #3: 95

[EricH]

Hmmm... I wrote down what I had found and the numbers differ slightly.

Lows:
All: 72.5

Highs:
#1: 105 #2: 135 #3: 120

Mains:
#1: 100 #2: 95 #3: 95

do you think I should rejet it to the book spec?

I think this was the first time the carbs have been apart as the paint wasn't cracked on any of the screws.

thanks again...

[ April 02, 2002, 06:37 PM: Message edited by: EricH ]

[Bryan Glynn]

I wouldn't do anything until you get it running and take some plug readings.

[Brent]

Thanks Bryan you the Man.