Tweet
is there any possible way to test these parts
-
-
you can test resitance on the coils inside the cdi but you should get a manual for the mspecs to do this.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums. -
is it possible i could link one of those things to my no spark at all on my ts 640Comment
-
what exactly are you referring to?SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
-
referring to my 1999 ts 640 which i was riding one day and it has no spark at all just quit after it had been running perfectly and i was wondering if it could have been the cdi or regulater causing this problem to occurComment
-
there are many possible problems that may have caused this. The first thing to check is fuses, if they are good you may want to make sure the plug wires are good and then the coils. Your best bet would be to get a service manual and go thru the electrical system to find the problem. The manual will list the different steps for troubleshooting and the different voltages and/or readings you should be getting when testing.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
Comment