I just installed an R&D acquavein and a pro Series Ride plate on my GP1200 (99').
I did not notice when pulling off the stock plate and grate if they are flush, but the ride plate sits about 1/4" higher than the intake grate. Should I shim the plate flush with the intake grate or is it ok to leave it like it is and shim according to handling characteristics?
(The ski is all stock except a Solas XO imp.)
Thanks
I did not notice when pulling off the stock plate and grate if they are flush, but the ride plate sits about 1/4" higher than the intake grate. Should I shim the plate flush with the intake grate or is it ok to leave it like it is and shim according to handling characteristics?
(The ski is all stock except a Solas XO imp.)
Thanks
Comment