Announcement

Collapse
No announcement yet.

garden hoes connection? where?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • garden hoes connection? where?

    hi i have a 96 waverunner III and i dont see any garden hoes connection. does it have one? if it does where is it? i need to run gas stabilizer through the carbs in my drive way.

    thanks sbt for the nice forums.

  • #2
    Re: garden hoes connection? where?

    Follow the line coming in from the rear lower engine compartment that goes to your motor from the pump.You should find a 'T' or 'Y' connector that runs to your hose connection....usually.Sometimes there is no flush kit installed,and you will have to install one yourself.Make sure that you get the 'Y' type fitting from Yamaha and have the water flow through the connection gong towards the motor.The line you want to tap into is the one coming in from the pump unit that goes to the motor...not the bilge.

    The Yamaha part number for the 'y' fitting is 63M-12581-00-00,then just get a flush kit...they will have a couple different types.
    Visit www.pwctoday.com for techical help

    Comment

    Working...
    X