Tweet
I have a 96 Yamaha 1100 triple in a Wave Venture and the smoke has finally gotten to me. How would converting to run pre-mix through the gas tank affect the carbs? I was less than happy to find out that the oil pump was a fixed rate pump and that there was not much I could do about it except cough and smoke everyone else out. I'm routing the oil pump output hose back to the oil tank for recirculation by way of a barb installed into the oil tank.
-
-
Re: Converting oil injection to pre-mix
Sorry, but you have no options. Pre-mix is the exact same thing as a fixed ratio pump - it's going to be exactly the same amount of smoke. The only thing you can do to lessen it is use a good synthetic oil.Last edited by Technical Support; 07-10-2006, 08:19 AM.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums. -
Re: Converting oil injection to pre-mix
Thanks for the quick reply.
I should explain further. The problem with the smoke does not happen when I'm riding or on the power. It's more of a problem when at idle and in no wake zones.Comment
-
Re: Converting oil injection to pre-mix
Which is 100% normal.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.Comment
Comment