Tweet
anyone know what carb settings i should start with on a 1996 waveblaster 760 with r and d flame arresters: high speed and low setting .what pop off should i have.
-
-
Lows at 2 turns out, Highs at 1. Pop off at 20. Start there, lean in.SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums. -
I just put a pro-tech pipe and tecati flame arrestors on a Blaster II with a 760.
I went up 10 to 140's on the main jest's and the carb settings were very close to stock.
Low's out 2 and high out 1.
stock pop off.
I set the highs at 2 out for the first test and had to come back in to around 1 out for the best performance with it a little on the rich side at WOT.Providing mobile JetSki service to the Charlotte / Lake Wylie area.Comment
Comment