Tweet
I am trying to de-winterize my ski. Put the battery, which had been on tender all winter, in the ski and hooked it up. When I hit the start button, the bilge runs for a short while, but no cranking. The dash display shows the usual 0 MPH and the gas gauge appears correct. When the bilge stops, the dash goes blank. No solenoid clicks or anything.
The security, L mode and warning LEDs are all unlit. The ski ran fine when I dropped it off at the dealer to be winterized. I had asked them to program the remote, I had bought the ski used and it never worked. They stated that there was something wrong with the wiring harness and that they could not program the remote.
Do you think they have somehow have gotten the thing in security mode?
I took the battery to my local Advance Auto to be tested. They said it was good, showing 626 CCA (325 CCA AGM battery) and 13.03 volts.
Thanks for your help.
The security, L mode and warning LEDs are all unlit. The ski ran fine when I dropped it off at the dealer to be winterized. I had asked them to program the remote, I had bought the ski used and it never worked. They stated that there was something wrong with the wiring harness and that they could not program the remote.
Do you think they have somehow have gotten the thing in security mode?
I took the battery to my local Advance Auto to be tested. They said it was good, showing 626 CCA (325 CCA AGM battery) and 13.03 volts.
Thanks for your help.
Comment