Just rebuilt all 3 carbs and set the low/high speed screws to the recommended turns in the post here on SBT forum. Replaced all the filters too. pop-off pressures great.
Took it out today for the first time since rebuild... starts up great and idles wonderful ... but at WOT from idle and coming off high speed run -> will start to bog down and has audible noise that sounds like it is pushing alot through the carbs.. (not sure how to describe the noise since it isn't really missing or hesitating) - just sounds like it can't process the mixture and will slow down ... then at a higher RPM (forgot to look).. hold on and runs fantastic.
Not sure if I should adjust the low speed or high speed adjusters since I don't want to mess with that higher RPM power..
Any help would be appreciated.
Thanks.
Took it out today for the first time since rebuild... starts up great and idles wonderful ... but at WOT from idle and coming off high speed run -> will start to bog down and has audible noise that sounds like it is pushing alot through the carbs.. (not sure how to describe the noise since it isn't really missing or hesitating) - just sounds like it can't process the mixture and will slow down ... then at a higher RPM (forgot to look).. hold on and runs fantastic.
Not sure if I should adjust the low speed or high speed adjusters since I don't want to mess with that higher RPM power..
Any help would be appreciated.
Thanks.
Comment