I now have my 2nd SBT motor installed and after the break in period it still does not run at it's old top speed and I think whatever blew it last time is still an issue.
1. Dash tach indicates 6000 RPM Max.
2. Did a plug check and the plug at the back is lean.
(Ran full throttle and pulled the lanard)
3. Checked compression and all three read 115 PSI
What else is left ? Anyone is Southeast Michigan you would recomend that knows the Ultra's real well ?
Thanks
1. Dash tach indicates 6000 RPM Max.
2. Did a plug check and the plug at the back is lean.
(Ran full throttle and pulled the lanard)
3. Checked compression and all three read 115 PSI
What else is left ? Anyone is Southeast Michigan you would recomend that knows the Ultra's real well ?
Thanks
Comment