Announcement

Collapse
No announcement yet.

seadoo xpl noise

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • seadoo xpl noise

    my seadoo xpl sucked in water through carbs cause exhaust gasket went so cleaned out cylinder and carbs, got going but now knocking noise from engine any ideas. still revs up just noisy

  • #2
    Re: seadoo xpl noise

    rebuilt it before you put a rod though the block
    PRIDE IN SERVICE<br /> <img src="http://www.sbtontheweb.com/images/forposts/4609/1.jpg" alt=" - " />

    Comment


    • #3
      Re: seadoo xpl noise

      Originally posted by 1fastski.com
      rebuilt it before you put a rod though the block
      when say rebuild it do you think its bent con rod or knackered needle bearing

      Comment


      • #4
        Re: seadoo xpl noise

        cant tell you with out hearing it , then even you wont know 100% untill you take it apart . but i can promiss if its knocking it wont take long before somthing gives and 99% of 951s damage the case and or cyls when they go .
        PRIDE IN SERVICE<br /> <img src="http://www.sbtontheweb.com/images/forposts/4609/1.jpg" alt=" - " />

        Comment


        • #5
          Re: seadoo xpl noise

          Originally posted by 1fastski.com
          cant tell you with out hearing it , then even you wont know 100% untill you take it apart . but i can promiss if its knocking it wont take long before somthing gives and 99% of 951s damage the case and or cyls when they go .
          thanks will take it to bits tommorow

          Comment

          Working...
          X