Blacktip Jetsports Mat Kits are a great upgrade to factory traction mats. They provide not only a custom look but superior traction for safety in all types of riding situations from racing to cruising. All mat kits come standard with Blacktip's Jetsports exclusive PSA ( pressure sensitive adhesive) to make installation easy - without the big mess of having to glue them down. Simply peel the backing off - press the mats into place and they are ready to go. This is an easy afternoon job and makes a world of difference on how your ski looks.

*Please note, we only accept returns on black cut-groove mats. All other mats are not stocked and considered custom. *Please Note, Color Samples may display differently depending on your PC/ MAC Monitor Settings. Color Samples are available upon request.

1996 1100 ZXI
1997 1100 ZXI
1998 1100 ZXI
1999 1100 ZXI
2000 1100 ZXI
2001 1100 ZXI
2002 1100 ZXI
2003 1100 ZXI

1995 750 ZXI
1996 750 ZXI
1997 750 ZXI

1995 900 ZXI
1996 900 ZXI
1997 900 ZXI

BlackTip Jetsports traction mats have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains due to user negligance. We do our best to make sure every traction mat set is perfect, but sometimes things happen.

If you should have a problem, please contact SBT @877.330.0231 or sales@sa;es@SBT.com to identify your issue.

Removal of original riveted mats :Drill the heads off of the rivets holding down the original mats while pushing the remaining rivet into the hull. Fill the holes left by the rivet with 5min. epoxy, this can be purchased locally at any auto parts store. Make sure to scrape the epoxy flat in the foot wells so the new mats will lay flush. Clean the area that the new mats will be attached to with acetone solvent for proper adhesion.

Removal of original glue down mats:By hand, peel off any old mat material that you are able to and then you use a putty knife to help remove all material from the difficult areas. Areas that are difficult may require spraying WD-40 brand lubricant in between the mat and hull to help loosen the old adhesive. Take your time on the prep work; this is important to achieve professional results.

Now that your surface is clean and ready for the new mats it is time to lay out how your mats will look in the foot wells. This is the location the mats will be att