Kawasaki Elite Traction Mat 1100 STX DI 2000-2003 / All STX 2001-2008

Kawasaki Elite Traction Mat 1100 STX DI 2000-2003 / All STX 2001-2008
Processing...
Brand: BlackTip Jetsports
Code: 130BE208
Quantity in Basket: None
Price: $149.95

Click on the images below to build your traction mat.

Qty

BlackTip Jetsports Elite traction mats are unlike anything the PWC industry has ever seen. With more color and pattern choices available than ever before. With the Elite series you are in control. You are no longer limited to pick from just the standard cuts and colors. You pick your pattern and then pick the top color and bottom color of your mats. The bottom color will show through when we finish cutting the pattern for your specific watercraft. The Elite series mats are made from the same high quality material as our standard mat kits and also include our high strength PSA.


*Please note - Elite Mats will be charged as soon as we get the order and before they are made (due to our inability to resell Custom/Elite mats). Once charged, you order will not be refunded. 

2004 STX 15F
2005 STX 15F
2006 STX 15F
2007 STX 15F
2008 STX 15F
2009 STX 15F
2010 STX 15F
2011 STX 15F
2012 STX 15F

2003 STX 12F
2004 STX 12F
2005 STX 12F
2006 STX 12F
2007 STX 12F

2010 STX
2009 STX

2001 900 STX
2002 900 STX
2003 900 STX
2004 900 STX
2005 900 STX
2006 900 STX

2002 1200 STX R
2003 1200 STX R
2004 1200 STX R
2005 1200 STX R

2000 1100 STX DI
2001 1100 STX DI
2002 1100 STX DI
2003 1100 STX DI
BlackTip Jetsports traction mats have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains due to user negligance. We do our best to make sure every traction mat set is perfect, but sometimes things happen.

If you should have a problem, please contact SBT @877.330.0231 or sales@sa;es@SBT.com to identify your issue.
Removal of original riveted mats :Drill the heads off of the rivets holding down the original mats while pushing the remaining rivet into the hull. Fill the holes left by the rivet with 5min. epoxy, this can be purchased locally at any auto parts store. Make sure to scrape the epoxy flat in the foot wells so the new mats will lay flush. Clean the area that the new mats will be attached to with acetone solvent for proper adhesion.

Removal of original glue down mats:By hand, peel off any old mat material that you are able to and then you use a putty knife to help remove all material from the difficult areas. Areas that are difficult may require spraying WD-40 brand lubricant in between the mat and hull to help loosen the old adhesive. Take your time on the prep work; this is important to achieve professional results.

Now that your surface is clean and ready for the new mats it is time to lay out how your mats will look in the foot wells. This is the location the mats will be attached. Trace around the mats using a pencil. This is your reference area to place the mats after the paper is peeled off the back of the mat.

Peel off the paper backing from the mat and line up one end of the mat to your traced out area. (Do Not Try to Install the complete mat in one shot) Slowly work the mat down into your outline.

After the entire mat is installed you must apply even pressure down on top of the mat to insure complete contact to the hull.

Let mats sit for 12 hrs after the install so the glue will fully cure.
Lead time for shipping is 5-7 business days.