Storage Cover for Polaris 1998-2002 SLH, SLXH, SLX, Pro 1200

Storage Cover for Polaris 1998-2002 SLH, SLXH, SLX, Pro 1200
Brand: WCSS
Code: 111WS303
Quantity in Basket: None
Price: $138.95



A good storage cover is essential to protect your Polaris watercraft while it is stored.

Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Polaris Jet Ski cover comes with a tie down strap kit for trailering locally.

The Polaris covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

All Polaris covers come in a Black and Gray 2 tone color pattern.

Polaris covers have a 1 year warranty against defects in workmanship or material.

Applications1998 SLH
1999 SLH
2000 SLH
2001 SLH
2002 SLH

1998 SLXH
1999 SLXH
2000 SLXH
2001 SLXH
2002 SLXH

1998 SLX
1999 SLX
2000 SLX
2001 SLX
2002 SLX

1998 Pro 1200
1999 Pro 1200
2000 Pro 1200
2001 Pro 1200
2002 Pro 1200
WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

If you should have a problem, please contact SBT @877.330.0321 or
InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.