Description
|
A good storage cover is essential to protect your Seadoo watercraft while it is stored. Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Seadoo Jet Ski cover comes with a tie down strap kit for trailering locally. The Seadoo covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate. All Seadoo covers come in a Black and Gray 2 tone color pattern. Seadoo covers have a 1 year warranty against defects in workmanship or material. |
installation guides & downloads
CleaningCleaning and Maintenance of the cover should be done periodically to help extend the life of the cover.To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush. You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material. If the cover is used outdoors, we suggest re-treating the cover with a water repellent treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection. |
Fits the items below
Click the + on each item to expand the model(s) for that brand / year.
2015 Sea-Doo
2015 Sea-Doo Spark 3Up2016 Sea-Doo
2016 Sea-Doo Spark 3Up2017 Sea-Doo
2017 Sea-Doo Spark 3Up2018 Sea-Doo
2018 Sea-Doo Spark 3Up2019 Sea-Doo
2019 Sea-Doo Spark 3Up2020 Sea-Doo
2020 Sea-Doo Spark 3UpInstallation Guides & Downloads
|
Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft. The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage. If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. |
Warranty
|
Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty. If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com |