Sea-Doo Storage Cover Custom GT /GTS /GTX 1990 1991 1992 1993 1994 1995 1996 1997 1998 2000
Description
A good storage cover is essential to protect your Seadoo watercraft while it is stored.
Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Seadoo Jet Ski cover comes with a tie down strap kit for trailering locally.
The Seadoo covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.
All Seadoo covers come in a Black and Gray 2 tone color pattern.
Seadoo covers have a 1 year warranty against defects in workmanship or material.
Applications1990 GT
1991 GT
1996 GTI
1992 GTS
1993 GTS
1994 GTS
1995 GTS
1996 GTS
1997 GTS
1998 GTS
1999 GTS
2000 GTS
1992 GTX
1993 GTX
1994 GTX
1995 GTX
1991 GT
1996 GTI
1992 GTS
1993 GTS
1994 GTS
1995 GTS
1996 GTS
1997 GTS
1998 GTS
1999 GTS
2000 GTS
1992 GTX
1993 GTX
1994 GTX
1995 GTX
WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.
If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.
If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.The watercraft should always be clean before installing any cover to prevent damage to the finish.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.
If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
Video