1993-1994 SPX/ 1989-1997 SP, SPI Custom Storage Cover

1993-1994 SPX/ 1989-1997 SP, SPI  Custom Storage Cover
    Brand: WCSS
    SKU #: 111WS104-C
    Quantity in Basket: None


    Each of our custom storage covers are made from a very high end 600 Denier solution dyed polyester to resist fading and dry rot. We use only the highest quality thread that is designed to withstand the harsh UV rays from the sun without it deteriorating. Each cover is custom fitted to your specific year, make and model watercraft so you know it will have a great look whether sitting on your dock or traveling down the road on your trailer. All covers have a shock cord sewn into the hem and include adjustable tie down straps for added security while trailering locally.

    Custom storage covers are sewn to order and usually ship in 48-72 hrs. Being a custom product there are no returns accepted. Covers have a 1 year warranty against any defects in material or workmanship.
    Contact SBT's sales team or email us at Sales@shopsbt.com for further assistance.

    Color samples may be sent to you upon request or viewed by clicking HERE

    Applications1993 SPX
    1994 SPX

    1989 SP
    1990 SP
    1991 SP
    1992 SP
    1993 SP
    1994 SP
    1995 SP
    1996 SP
    1997 SP

    1993 SPI
    1994 SPI
    1995 SPI

    1993 SPX
    1994 SPX
    WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

    If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
    InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

    The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

    If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.
    Product Reviews